CHASSIS 7-3
REAR FENDER
• Remove the seat. ("7-2)
• Disconnect the coupler 1.
• Remove the left or right side frame handle grip.
• Remove the rear fender 2.
!
Be careful not to scratch the rear fenders.
NOTE:
When installing the frame handle grip bolts, apply a small quan-
tity of THREAD LOCK "1303" to its mounting bolts and tighten
them to the specified torque.
# 99000-32030: THREAD LOCK SUPER "1303"
$ Frame handle grip mounting bolt A (M10): 50 N . m
(5.0 kgf m, 36 0 lb-ft)
REMOUNTING
Remount the seats, covers and rear fender in the reverse order of
removal.