Suzuki VL800 Service Manual page 403

Is the voltage OK?
• G/B, G/W, R or B/Br wire open or shorted to
ground, or poor L, 3, 6 or D connection.
• If wire and connection are OK, intermittent trou-
ble or faulty ECM.
YES
• Recheck each terminal and wire harness for
open circuit and poor connection.
• Replace the ECM with a known good one, and
inspect it again.
If check result is not satisfactory, replace IAP sen-
NO
sor with a new one.
4) After repairing the trouble, clear the DTC using SDS tool.
($14-39)
Output voltage (Vcc voltage 4.5 – 5.5 V, ambient temp. 20 –
30 °C, 68 – 86 °F)
ALTITUDE
(Reference)
(ft) (m)
0 0
 
2 000 610
2 001
611
 
5 000 1 524
5 001 1 524
 
8 000 2 438
8 001 2 439
 
10 000 3 048
ATMOSPHERIC
PRESSURE
(mmHg) kPa
760 100
 
707 94
707 94
 
634 85
634 85
 
567 76
567 76
 
526 70
OUTPUT
VOLTAGE
(V)
3.4 – 4.0
2.8 – 3.7
2.6 – 3.4
2.4 – 3.1
VL800K5 ('05-MODEL) 14-51
Wire harness side