Suzuki VL800 Service Manual page 183

REASSEMBLY AND REMOUNTING
Reassemble and remount the front wheel in the reverse order of
removal and disassembly. Pay special attention to the following
points:
WHEEL BEARING
• Apply SUZUKI SUPER GREASE "A" to the bearings before in-
stalling.
For USA
' 99000-25030: SUZUKI SUPER GREASE "A"
For the other countries
' 99000-25010: SUZUKI SUPER GREASE "A"
• Install the wheel bearings using the used bearings and special
tool as described below.
% A 09941-34513: Bearing installer set
B 09913-70210: Bearing installer set (40 mm)
!
* First install the right wheel bearing, then install the left
wheel bearing.
* The sealed covers on the bearings must face to the
outside.
Left
BRAKE DISC
• Make sure that the brake disc is clean and free of any grease.
Apply THREAD LOCK SUPER "1360" to the brake disc bolts
and tighten them to the specified torque.
( 99000-32130: THREAD LOCK SUPER "1360"
$ Brake disc bolt: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
Right
Left
Clearance
CHASSIS 7-7
Right