FUEL LEVEL METER
• Remove the fuel tank. (&5-3)
• Connect the speedometer.
• Connect each resistor between the Yellow/Black and Black/
White lead wire at the wire harness.
• Turn the ignition switch "ON" position and wait for approx, 13
seconds.
Check the display of fuel meter as shown below. If any abnormal-
ity is found, replace the speedometer with a new one.
Less than
Resistance
17 Ω
Fuel level
meter
22 – 28 Ω
49 Ω
33
ELECTRICAL SYSTEM 8-25
Main wiring
harness
54 – 69 Ω
74 – 83 Ω
To fuel level
gauge
Resistor
More than
94 Ω
Flicker