Call Park - Panasonic DBS 824 Manual

Key Telephone Features
l
l
l
l
l
l
l

Call Park

(CPC-S and CPC-M)
You can use the Call Park function to transfer a call, even if you cannot locate
the intended recipient of the call Simply park the call, and then page the
person you want to transfer to That person can answer the call from any
extension by dialing the number of the extension that parked the call
Operation
To park a call
1
Issued 3/l /95
If the Automatic Outside Line Hold feature is programmed for your
system, pressing any other line key will place your original call on System
Hold
A held call will recall if it is not retrieved before the Hold Recall Timer
expires "Hold Recall ##XX" (where "XX" is the outside line number)
appears on the display if a call has been held beyond the time limit
If you press the HOLD key during a conference with two outside lines,
both outside lines will be placed on hold
If your system is set to onhook transfer and you have placed an outside call
on hold, and you then make an Intercom Call, make sure the other
extension presses the FLASH key or hangs up before you do If you hang
up before the other extension,
that extension
If there is no response to the Hold Recall, the tone is issued at the
Attendant Phone (extension 100 or 10) However, no tone is issued at the
Attendant Phone if Night Mode is activated or if the call is on a Private
Line
An error tone is issued if you attempt to place more than one intercom call
on hold at the same time
The DBS 824 can provide Music-on-Hold to callers placed on hold See
"Music-On-Hold" (page l-24) for more information
Press the HOLD key
DBS 824-l O-700
the held outside line will be transferred to
Call Park
3-17