Panasonic DBS 824 Manual page 16

Hide thumbs Also See for DBS 824:
Table of Contents

Advertisement

April 2 1996
Operation
Notes
The first device to go off-hook will seize the line (off-hook is either lifting the
handset or pressmg the ON/OFF key) If the analog device goes off-hook first, the
large-display phone will be unable to dial or go off-hook
You can choose which device will rmg by going off-hook at either the digital key
telephone or the analog device and dialing "71 The digital key telephone display
will reflect "Analog port RING" or "Key Tel RING", depending on which device
You can still answer an mcommg call from either device, regardless of which
device is rmging For example, if the analog device is rmgmg, you can pick up the
call on the digital key telephone by going off-hook before the analog device does
Similarly, if the digital key telephone is rrngmg or has not answered a voice call,
the analog device can pick up the call by gomg off-hook first
You can program the *7 1 ring select comand into an FF key Pressmg the key
toggles between "Analog Port RING" and "Key Tel RING" When the analog port
LED is off
Phone Restrwtions
The Analog Adapter will work on the large-display phone only (VB-44225)
l
A dial-pulse SLT will not function on the analog port
l
Stutter Dial Tone (indicatmg Call-Forwarding mode, Do-Not-Disturb mode,
l
etc ) will not function on an SLT connected to the Analog Adapter
An analog phone connected to the Analog Adapter cannot program or access
l
speed dials
Incoming Calls
You cannot program both devices to ring simultaneously
The "*71" code will not work if the other device is m use
The "*7 1" code will not work if FF3 (ExtPort)# 5 l# is set to "0"
If set to "Analog port RING", the large-display phone will work like an
If the phone is in CF/DND (Call-Forward or Do Not Disturb), the phone will
remain m CF/DND even if the nngmg device is changed via the "71 code
The mcommg rmg pattern for the analog device is the same as for the digital
key telephone (determined by the Extension Rmg Pattern m FF3 (ExtPort)# 38#
automatically default to "1 second ON, 3 seconds OFF "
DBS Release Notes
CPC S/M Version 2 0
44 Series Phone Support
Page 15

Advertisement

Table of Contents
loading

Table of Contents