Panasonic DBS 824 Manual page 293

Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FF2 (Trunk)# 19# (HHMM)#
Description
Use this address to program a DISA trunk to begin DISA operation at a
specified time each day Trunks
Answer address (FF2 Trunl# ll#) Use this DISA Start Time address and
the DISA End Time address following, to limit DISA operation on a trunk to
a certain time period each day
Programming
To set the DISA start time
Enter the time using the 24-hour format The following example sets the time
to3
To clear the DISA start time
Related Programming
Time Setting FFl l# 2# (HHMM)#
DISA Inbound Call ID Code FFl 5# (0000-9999)#
DISA Outbound Call ID Code 1 FFl 6## l# (0000-9999)#
DISA End Time FF2 (Trunk)# 20# (HHMM)#
Notes
DISA Operation With Default Setting
address (left at default ****), DISA operation will be on all the time
Caller ID Automatic DZSA
Automatic DISA operation with Caller ID (FF12# 8# l-lO# PhoneNo #)
2-16
are enabled
FF2 (1-6 or l-8)# 19# (1515)#
Trunk Number
CPC-S l-6
CPC-M 1-8
FF2 (l-6 or l-8)# 19# CONF ON/OFF
FF2 (Trunk)++ ll# (0 or l)#
This DISA Start Time setting does not affect
DBS 824-l O-400
for DISA using the DISA Auto
Time Setting
(24-hour format)
Issued 3/l /95
FF2