Panasonic DBS 824 Manual page 181

Transfer Ring Pattern
Software Version CPC-S and CPC-M, Version 1 0 and higher
A d d r e s s FFl 2# l# 28# (0-6)#
Description
This program address allows you to choose a distinctive ringing pattern for
transferred calls on all DBS 824 phones This setting will override the
Extension Ring Pattern (set in address FF3 ExtPort# 38#) when calls are
transferred to the extension
The ring pattern selected in this address will vary according to the type of
phone (Digital or Analog) connected to the extension port, see table below for
these ring patterns
Programming
Table 1-2 Transfer ring patterns
Related Programming
Terminal Type FF3 (ExtPort)# 2#
Extension Ring Pattern FF3 (ExtPort)# 38#
Adapter Pequirement For Analog Phones
digital extension ports a Single-Line Telephone Adapter (SLT-A) is required
if analog phones are used Each SLT-A can support up to four analog phones
(and four corresponding extension ports), see Section 300~Installation for
more information
Issued 3/l/95
Transfer Ring Pattern (in seconds) For
A d d r e s s
Number Digital Phones
0
1
2
3
4
5
6 1 on/7 off
DBS 824 lo-400
Transfer Ring Pattern
Transfer Ring Pattern Number
Analog Phones (SLT-A)
25 on/325 off
1 on/7 off
Since the DBS 824 has only
Page 1-33