Panasonic DBS 824 Manual page 363

Hunt Group Members
Hunt Group Members
Address FF4 3# (HuntGrp)# (520)# (ExtNumber)#
Description
Use this program to assign an extension to a hunt group, and determine its
sequential position within the hunt group Up to 16 positions are available in
each hunt group The extension numbers entered in this address must already
be assigned to extension ports in address FF3 (ExtPort)# 1# (lo-69 or 100
Note: A pilot number must be assigned to the hunt group in address FF4 3#
However, do not include the pilot number here in Hunt Group Members
Programming
To assign an extension number to a position in a hunt group
Hunt Group Number'
CPC-S and CPC-M l-4
Hunt Group Number
CPC-S and CPC-M l-4
4-12
FF4 3## (l-4)# (520)# (lo-69 or lOO-699)#
Hunt Group Position (5-20)
11 =Position 7
FF4 3## (l-4)# (520)# CONF ON/OFF
NOTE: The extension must be idle while you are removing it
from the hunt group, otherwise, it will not be removed
DBS 824-l O-400
Extension Number
Position in Hunt Group (5-20)
Issued 3/l 195
FF4