Panasonic DBS 824 Manual page 219

Maintenance Data (Serial Port CN2)
Check (Maintenance Port)
Parity
Software Version
Address
Description
This program determines whether the DBS 824 uses parity checking over
serial port CN2, which is normally dedicated for remote maintenance
select Even or Odd parity
Programming
Related Programming
Odd/Even Parity (Maintenance Port) FFl 2# 9# 2# (0 or l)#
Notes
Checking Cotnmunictins Parameters Be sure to properly set all
communication programming addresses when modifying any single address
value Communication parameters for Maintenance are set with addresses
Issued
CPCS and CPC-M, Version 1 0 and higher
DBS 824-l O-400
Parity Check (Maintenance Port)
or l)#
on the parity check
l-71