Installation - Panasonic DBS 824 Manual

Door Box Adaptor
Door Box Adaptor
Guidelines
l
l
l

installation

1
2
Figure 5-23 Cable punch-out pIu.te
3
5-28
The Door Box Adaptor (VB-437 11) requires a door opener In addition, a
Door Box (door phone) (VA-43705) is normally used with the Door Box
Adaptor The door opener is not sold by Panasonic it can be purchased
separately from an electronics dealer
Each Door Box and opener use one extension port
The following tools are required to install the Door Box Adaptor
Remove the cover from the Door Box Adaptor
Remove the cable punch-out plate (Figure 5-20) in order to make an
opening for the cables coming into the Door Box Adaptor
To remove the plate, cut the grooves on either side with diagonal cutters
Then bend the plate back and forth with needle-nose pliers to remove it
Adaptor
B O X
Mount the Door Box Adaptor on the wall using the three screws provided
with the unit
DBS 824-l O-300
Telephones and Peripheral Equipment
Issued 3/i I95