Panasonic DBS 824 Manual page 283

Pooled Trunk Access for Groups 'r81-86"
CPC-S
Software Version
Address
FF2 (Trunk)# (4-9)# (0 or l)#
Description
Use this feature to place a trunk in a group from which trunks are
automatically chosen for outbound dialing When you dial 8 1,82,83,84,85
or 86 from an SLT or digital extension, or press an FF key that is set as a
pooled trunk key, any available trunk in the group will be accessed
The trunk selection in a particular group is made from the highest available
trunk number to the lowest available trunk number
Programming
Trunk Number'
Placing Trunks In More Than One Group
Notes
more than one pooled trunk group, including trunk group 9
Required Hardware Setting
must
2 - 6
and CPC-M, Version 1 0 and higher
FF2 (l-6 or l-8)# (4-9)# (0
Pooled Trunk Group
CPC-S l-6
CPC-M l-8
be cut. See Section 300 Installation
DBS 824-10-400
or l)#
The same trunks may appear in
To use pooled trunks, Strap J3 on the CPC card
for instructions
FF2
included
issued 3/l/95