Centrex/Pbx Compatibility; Direct Inward System Access (Disa) - Panasonic DBS 824 Manual

Users can assign an FF key to flash when there are new entries in the log
When the user presses the key to access the log, the LED turns off
Call Logs can be assigned to both attendant and non-attendant extensions

Centrex/PBX Compatibility

(CPC-S and CPC-M)
Description
or PBX lines
The DBS 824 supports up to 8 access codes for dialing centrex or a PBX
These access codes allow the DBS 824 SMDR output to exclude the number
dialed to reach a centrex or PBX line
The DBS 824 also supports transmission of a flash signal over the centrex or
PBX link
Related Programming
l
l
l
Considerations
l

Direct Inward System Access (DISA)

(CPC-S and CPC-M)
Description
Direct Inward System Access (DISA) gives off-site users dial-in access to the
DBS 824 Users access DISA by dialing in on the DISA trunk
1-14
FF2 (Trunks) Trunk Type
FF8 (Least Cost Routing) LCR Add Tables
The LCR Add Table can be used to prefix digits for outgoing calls through
DBS 824-l O-700
System Features
issue Date 3/l/95