Panasonic DBS 824 Manual page 266

Software Version
Address FFl 5# (0000-9999)#
Description
This program allows you to enter a DISA ID code Once a caller has dialed
into the DBS 824 using a DISA trunk, dialing this code provides direct access
to intercom dial tone
Programming
To set the DISA ID code
To clear the DISA ID code
Related Programming
DISA Outbound Call XD Code 1 FFl 6# l# (0000-9999)#
DISA Outbound Call ID Code 2 FFl 6# 2# (0000-9999)#
DISA Start Time FE2 (Trunk)# 19#
DISA End Time FF2 (Trunk)# 20#
DISA Auto Answer FE2 (Trunk)# 11#
Notes
tone to a CO trunk defined as a DISA trunk If a DESA ID code is stored in
place of the default setting (via remote programming), a DISA dial tone (fast
busy tone) will be heard instead of intercom dial tone
The DISA dial tone is a signal to proceed with your call until you enter the
stored DISA ID code After the DISA ID code is entered, the intercom dial
tone is presented This provides the opportunity to make an extension call
To make an outbound CO trunk call, enter #7, dial 9 or 8 l-86 (to access a CO
trunk), then dial the 4digit DISA ID code
1-118
Code
CPC-S
and CPC-M, Version 1 0 and higher
DBS 824-l O-400
4-Digit ID Code
Issued 3/l /95