Panasonic DBS 824 Manual page 406

FF7
International Calling on Extensions
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FF7 l# 18## (ExtPort)# (0 or l)#
Description
This address applies only to systems programmed to use the new NANP
dialing plan (FF7 l# 16#) It also applies only to TRS types 3-6 (TRS types
O-2 do not allow international dialing, TRS type 7 allows all dialing)
Use this address to allow or restrict international calling on individual
extension(s) that are "exceptions to the rule" When an extension attempts an
overseas call (trunk access + 01 or 011) on a trunk assigned TRS type 3-6, the
system checks the setting in this address (default=restrict call) However, if
this address is set to ' l", the system checks the "International Calling For
TRS Types 3-6" (FF7 l# l#) to see if the dialed country code should be
checked against the Country Code Table (FF7 l# 19#) before allowing the
call If so, and if the dialed country code is included in the table, the call is
allowed
Programming
Related Programming
International Calling For TRS Types 3-6
Dialing Plan Switch
Country Code Table FF7 1# 19# (Table)+! (Code)++
Notes
stage of the process, it sends a busy tone to the user and displays "Restricted"
on the phone
Interaction with
setting is not checked for TRS types O-2 or 7 International calls are always
restricted for TRS types O-2, and always allowed for type 7
Issued 3/l /95
FF7 l# 18# (l-16 orl-24)# (0 or l)#
Extension Port
CPC-S 1-16
CPC-M. l-24
FF7
TRS
DBS 824-l O-400
International Calling on Extensions
l=Check the International
Calls Switch (FF7 l# l#)
FF7 l# l# (0 or l)#
7-13