Panasonic DBS 824 Manual page 161

Key Bank Hold
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FFl 2# l# 9# (0 or l)##
Description
Use this program address to enable or disable the Key Bank Hold feature in
the DBS 824 system
If Key Bank Hold is enabled, a phone user can switch back and forth behveen
trunk calls (by pressing the FF key for each trunk) without placing the current
trunk on hold Also, an attendant phone can press a DSVBLF key to
automatically transfer a trunk call to an extension without pressing HOLD
current trunk call on system hold when the phone user presses the FJ? key or
If Key Bank Hold is disabled (default setting), the phone user must press
HOLD before accessing a second trunk or transferring a call
Programming
Issued 3/l/95
l=Key Bank Hold is enabled
DBS 824-l O-400
Key Bank Hold
Hold
Bank is disabled
Page l-13