Disa Auto Answer - Panasonic DBS 824 Manual

Software Version
Address FF2 (Trunk)# ll# (0 or l)#
Description
Use this feature to set a trunk(s) to automatically provide DISA tone upon
connection with an inbound caller (However after hearing the DISA tone
the caller will still have to enter an ID code in order to use DISA )
If a trunk is set to provide DISA tone, you can limit DISA operation on that
trunk to a certain number of hours each day using the DISA Start Time and
DISA End Time addresses
Programming
Related Programming
Direct Inward System Access (DISA) ID Code FFl 5# (0000-9999)#
DISA Outbound Call ID Code 1 FFl 6# l# (0000-9999)#
DISA Outbound Call ID Code 2 FFl 6# 2# (0000-9999)#
DISA Start lime FF2 (Trunk)# 19# (HHMM)#
DISA End Time FF2 (Tiunk)## 2O# (I-IHMM)#
Notes Interaction With
automatically enable or disable DISA to the caller based on the phone number
he is calling from )
Hardware Requirement For DISA
that the system can interpret DTMF tones entered via the DISA connection
2 - 8
CPC-S and CPC-M, Version 1 0 and higher
I
Trunk Number
CPC-S: l-6
CPC-M l-8
DBS 824-l O-400
l=DISA tone is provided
ID
If your DBS 824 system supports Caller ID, do
An MFR card is required for DISA, so
FF2
Issued 3/l /95