Ml/Mc0 Separation - Panasonic DBS 824 Manual

Hide thumbs Also See for DBS 824:
Table of Contents

Advertisement

FF3
Software Verdon CPCS and CPC-M, Version 'I 0 and higher
FF3 (ExtPort)## 43#/ (0
Address
Description
Use this address to program an extension to have MC0 (Multi-CO) or ML
(Multi-Line) FF keys
The difference between ML and MC0 has to do with incoming calls MC0
means multiple trunks can he received at the extension -- if you press a
flashing FF key, you will get an incoming trunk call Calls from another
extension will flash on the "EXT" LED (not through the FF key)
ML, on the other hand, means you can receive either a trunk call or an
extension call on an FF key, which will flash for either type of call
If this address is set to ML, each FF key must be individually enabled for ML/
Programming
Related Programming
FF Key Assignments for Extensions FF5 (ExtPortj# (Key)++ (Featu.re)#
Issued 3/l/95
or
FF3 (l-16 or l-24)# 43# (0 or l)#
Extension Port
CPC-S 1-16
CPC-M l-24
DBS 824-10-400
O=MCO keys
Note: The default for the first
attendant position is "1," rather
than "0 "
3-49

Advertisement

Table of Contents
loading

Table of Contents