Figure 5-21 Extension Cord Connection To The Vau - Panasonic DBS 824 Manual

Voice Announce Unit (VAU)
3
Figure 5 20 Cable punch-out pIa&. Voice Announce Unit
4
5
Figure 5 21 Extension cord connection to the VAU
the bottom
of the VAU
6
5-26
Remove the cable punch-out plate (Figure 5 20) to make an opening for
the cab!e coming into the VAU
To remove the plate, cut the grooves on either side with diagonal cutters
Then bend the plate back and forth with needle-nose pliers to remove it
L
Mount the VAU on the wall using the three screws provided with the unit
(See Figure 5-22 )
Connect the extension cable from the DBS 824 to CNl on the VAU
Note that two inside pins on CNl are port 1 The two pins on either side
are port 2, as shown in Figure 5-21
Install the cover on the VAU
DBS 824-l O-300
Telephones and Peripheral Equipment
BK G Y
Port 2
Issued 3/l /95