Panasonic DBS 824 Manual page 695

DSLT Features
l
Intercom Calling
(CPC-S and CPC-M)
Descriptions
The DBS 824 provides two methods of intercom calling voice calling and
tone calling
Voice Calling
immediately, without a ringing tone
Tone Calling
System programming determines whether the DBS 824 uses voice or tone
calling as a default If voice calling is the default, dialing a "1" after the
extension number will change the call to a tone call If tone calling is the
default, dialing a "1" will result in a voice call
Operation
To make a Voice Call
1
2
3
Issued 3/l /95
differently, depending on whether they are trunk or intercom calls
Intercom calls receive busy tone, trunk calls are routed to the extension
defined in permanent call forwarding
The following types of incoming trunk calls will follow permanent call
forward settings
The DND feature cannot be activated at an extension selected to receive
With voice calling, intercom calls are connected
Lift the handset.
Dial the extension number
If the system default is tone calling, dial a "1 "
DBS 824-l O-700
Intercom Calling
4-23