Attendant Call Park - Panasonic DBS 824 Manual

Attendant Features

Attendant Call Park

(CPC-S and CPC-M)
Description
Using the Attendant Call Park feature, the Attendant may park an outside call
until the called party can be found The attendant can then use the Paging
feature to inform the called party of the call's Park Number The parked call
can then be retrieved from any extension by dialing the Park Number
The attendant phone is equipped with ten outside line Park Numbers (00-09)
Programming a Call Park key into an FF key on a telephone or a DSS console
makes one-touch Call Park possible
Operation
To park an outside call
1
2 Dial "75 "
3
To release a parked call (after receiving the Park Number from the
Attendant)
1
2 Dial "76 "
3
issued 3/l /95
HOLD
Press the key
The outside call is placed on hold
l
"CO HOLD #XX" (where "XX" is the trunk number) appears on the
l
display
Enter desired Park Number (00-09)
"PARK HOLD 01" appears on the display if you selected Park Number
01
Pick up the handset.
The phone issues intercom dial tone
Enter the Park Number assigned to the call
"PARK PICK XX" (where "XX" is the park number) appears, and then
"CO TALK #XX" (where 'XX" is the trunk number of the call) appears
DBS 824-l O-700
Attendant Call Park
2-5