System Speed Dial - Panasonic DBS 824 Manual

Speed Dialing
Considerations
l
l
l
l
l
l
l

System Speed Dial

(CPC-S and CPC-M)
Description
Frequently called numbers can be stored using the System Speed Dial feature
System Speed Dial numbers are programmed from the Attendant Phone and
can be used by any extension With the CPC-S and the CPC-M set in the
standard mode, up to 90 System Speed Dial Numbers can be stored (00-89)
Numbers can be stored (000-199)
Operation
To use a programmed System Speed Dial key
Personal Speed Dial numbers can contain up to sixteen characters,
including the "*," "#," FLASH (indicate "-"), PAUSE (REDIAL),
CONF, and AUTO keys
A dash (,'-") can be displayed in the Personal Speed Dialing number To
display a dash, press the FLASH key where you want the dash to appear
If you make a mistake while programming, an alarm tone is issued and
"ERROR" appears on the display If this happens, start again from step 1
Storing a new number erases any previously stored data
Names for Personal Speed Dialing can be programmed using a DSS
console at the Attendant Phone
If the called party's number and name are stored in the Personal Speed Dial
code, that information appears on the display when you use the speed dial
code
Speed Dial numbers cannot be checked while Station Lockout is activated
Key Telephone Features