Panasonic DBS 824 Manual page 582

Attendant Features
Note: The VM key is assigned differently, depending on whether it is used
for personal message retrieval or attendant transfer See the following
"Operation" section for instructions
Operation
To assign a voice mail key
Note: You cannot program this feature if trunks are assigned to the key First
clear the FF assignments, then use the following procedures to assign the VM
1
2
3
4
5
6
7
8
Attendant Transfer to Voice Mail
1 The attendant answers an incoming call
2 The attendant checks the DSS/BLF key for the extension If the light is
Issued 3/l /95
Press the ON/OFF key
The phone issues intercom dial tone
l
The ON/OFF LED lights
l
Press the PROG key
Press the FF key, DSS key, or One-Touch key
Press the CONF key
Press the AUTO key
Dial the voice mail extension number
If the key is for personal message retrieval, enter a password (XXX or
AUTO 00-99) if desired If the key is for attendant transfer to voice mail,
do not enter a password but include any special codes (* or #, for
example) if they are required by the voice mail system
Note: The length of the password and the VM extension number cannot
exceed six digits If the VM number and the password total more than six
digits, assign the password to a personal or system speed dial number (OO-
99 or 000- 199,900-939)
Press the HOLD key
The incoming caller asks to be transferred to an extension number
red, the attendant presses the VM key followed by the DSS/BLF key
DBS 824-l O-700
One-Touch VM Transfer
2-15