Section 1 - System Settings (Ffi) - Panasonic DBS 824 Manual

These forms may be reproduced as needed by certified DBS Dealers and Technicians
Section 1 - System Settings (FFl)
PARAMETER
General System Settings (FFl2f l#)
Call Duration Display
Least Cost Routing (LCR) Access
Overrideloll Restriction with SSD
Numbers
SSD Display Restriction
Auto Flash Redial
One Touch Dial
Key Bank Hold
Non Appearing Trunk Hold
SLT Flash Control
Extension Number Digits
Attendant Intercom Calling
Voice Mail Busy Tone
Delayed Ring
Second Attendant Position
Third Attendant Position
Fourth Attendant Position
Attendant Transfer Extension
Attendant Override
Extension (BLF) Delayed Ring
Transfer Ring Pattern
Page Duration
2
Table 1: System Parameters (Part I)
POSSIBLE ENTRY
Not Displayed (0) Display (1)
5 see (0) 16sec (1) or30sec (2)
Pooled-trunk call (O), LCR call (1)
0 0 89orOOOthru199
SSD (SO-89 or 160 199) dialed digits displayed (0)
SSD (80 89 or 166-199) dialed digits not displayed (I)
Redial does not send flash (0)
Redial sendsflash (1)
Disabled (0) Enabled (1)
Disabled (0) Enabled (1)
Disabled (0), Enabled (1)
Exclusive hold (0) System hold (1)
2nd SLT hookflash results in intercom dial tone (0)
2nd SLT hookllash results in held call (1)
2 digit numbers (0) 3-digit numbers (1)
Ring tone calling (0) Voice Calling (1)
Tone Calling (0) Voice Calling (1)
Disabled (0) Enabled (1)
Disabled (0) Enabled (1)
1 not required before long distance call (0)
1 required before long-distance call (1)
Display 5 SSD names (0) Display 10 SSD Names (1)
Future Use
Silence (0), Busy Tone (1)
Disabled (0) Enabled (1)
Extension Number (101)
Extension Number (*** No entry)
&tension Number (*** Noentry)
Extension Number (* * No entry)
Disabled (0) Enabled (1)
See Section 400 ( 25 on/ 25 off/ 25 on/3 5 off 0)
Page Circol Remains Open (0) Open 60 set (1)
DBS 824-10-450
A D D R E S S SETTING
Issued 8/l/95