FF2
Pooled Trunk Access for Group "9"
Software Version CPGS and CPC-M, Version 1 0 and higher
Address
Description
Use this feature to place a trunk in a group from which trunks are
automatically chosen for outbound dialing When you dial "9" from an SLT
or digital extension, or press an FF key that is set as a pooled trunk key any
available trunk in the group will be accessed
The trunk selection is made from the
lowest
Programming
I
Notes
so that dialing "9" indicates a Pooled Trunk call If this option is set so that
dialing "9" indicates an LCR call, trunk selection will default to pooled trunk
line access group 9 if all lines that could be used for LCR access are busy
must
Issued
FF2 (l-6 or l-8)# 3# (0 or l)#
Trunk Number
CPC-M 1-8
be cut See Section 300~Installation
DBS 824-l O-400
Pooled Trunk Access for Group 9
highest
trunk number in the group to the
is included in access group cc9yy
for instructions
2-5