3.7.2 Call Park
The following calls cannot be held:
DISA (Refer to 3.1.4 DISA (Direct Inward System Access))
Meet Me (Refer to 3.9.2 Meet-me conference)
Doorphone (Refer to 3.11.1 Doorphone Call)
Built-in VM (Refer to 5 Voice Mail Features)
Paging (Refer to 3.10 Paging Features)
For KX-HDV series only:
If a call on hold is not retrieved within a preprogrammed time period
(Hold Recall (s)), the operated extension rings. If Hold Recall (s) is
set to 0, this feature is disabled.
A person holding a line will hear Music on hold (MOH).
2.2.5 PBX Configuration—[1-5] System—Timers
3.7.2 Call Park
An extension user can hold a call by placing it into a common parking zone of the PBX.
A parked call can be retrieved by any extension user. This feature is useful when an extension user wants to
hold more than one intercom call or outside (CO) line call with an extension.
Perform Call Park using the following procedure:
Put the current call on Consultation Hold by executing the following operations:
SIP: Press the [TRANSFER] button
After a dial tone is heard, dial the Call Park feature number and   (Refer to 2.1.1 Feature Number
Lists for User).
When a Call Park is successful, a Park Area Number will be announced. Record it as it is a necessary
parameter when performing Call Park Retrieve. After Park Area Number announcement is complete, the
operated extension will hear the Music on hold (MOH).
[Call Park Retrieve]
To retrieve a parked call, go off-hook and dial the Call Park feature number and a Park Area Number. (Refer
to 2.1.1 Feature Number Lists for User)
After Call Park is successful, if it continues until the Hold Recall(s)
timer elapses, a re-call occurs to Call Park executor.
Call Park cannot be used for doorphone calls.
Refer to 3.7.3 Music on Hold.