Offhook Signal (Co) - Panasonic DBS 824 Manual

(CO)
Software Versibn CPC-S and CPC-M, Version 1 0 and higher
Address FF3 (ExtPort)# 7# (0 or l)#
Description
This program determines if the DBS 824 system sends a tone signal to busy
extensions when an additional trunk call arrives
Programming
To activate the Offhook Signal
To reset the Offhook Signal to the default value
Related Programming
Conditions Under Which the Signal Is Not Sent. The system does not send
Notes
the offhook signal during a conference call, while the called extension is on
824, offhook signalling must be enabled on all extensions
3-10
FF3 (l-16 or l-24)# 7# (0 or l)#
Extension Port:
CPC-S 1-16
CPC-M l-24
FF3 (l-16 or l-24)# 7# CONF ON/OFF
DBS 824-l O-400
Note: Default for the primary
attendant is 1 (on)
Issued
FF3
I