Attendant-Controlled Text Assignment - Panasonic DBS 824 Manual

Attendant Features
l

Attendant-Controlled Text Assignment

(CPC-S and CPC-M)
Description
The attendant can assign text to extensions, system speed dial numbers, and
Call Waiting/OHVA text replies without using a DSS/72 or entering the
programming mode
Text is assigned through the dial pad on the attendant phone
Operation
assign names to extensions
To
1
2 Press PROG
3
4
5
6
7
To
1
2 Press PROG
Issued 3/l /95
On DSS consoles equipped with DSS keys, the indicator for an extension
that has Absence Message, Call Forwarding, or DND activated lights
green This indicator goes off when the feature is canceled The indicator
does not light for Permanent Call Forwarding
Pick up the receiver or press the ON/OFF key
Enter the extension's port number
Press AUTO to backspace and erase the existing name
Use the dialpad sequences shown in Table 2-l on page 2-8 to enter letters
and/or numbers
Press FLASH after each letter
Press CONF to switch between numbers and letters
To store your entry, press HOLD
assign names to System Speed Dial numbers
Pick up the receiver or press the ON/OFF key
DBS 824-l O-700
Attendant-Controlled Text Assignment
2-7