Panasonic DBS 824 Manual page 294

FF2
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FF2 (Trunk)## 20# (HHMM)#
Description
Use this address to program a DISA trunk
specified time each day Trunks are
Answer address (FF2 Trunl# 1 l#) Use this DISA End Tiie address, and the
DISA Start Time address (previous page), to limit DISA operation on a trunk
to a certain time period each day
NOTE:
time set in this address (In the example below, DISA will actually end when
the system clock reaches 8 16 a m )
Programming
To set the DISA end time
Enter the time using the 24-hour format. The following example sets the time
to 8 15 a m
To clear the DISA end time
Related Programming
Tie Setting FFl l# 2# (HHMM)#
DISA Inbound Call ID Code
DISA Outbound Call ID Code 1 FFl 6# l# (0000-9999)#
DISA Outbound Call ID Code 2 FFl 6# 2# (0000-9999)#
DISA Auto Answer FF2 (Trunk)# ll# (0 or I)#
DISA Start Tre FF2 (Trunk)# 19# (HHMM)#
Notes
Automatic DISA operation with Caller ID (program address FF12# 8# l-10++
Issued 3/l 195
The DBS 824 will disable DISA to the trunk one minute afrer the
(DISA
will actually end
FF2 (1-6 qr l-S)## 20## (0815)#
CPC-S 1-6
CPC-M l-8
or
FF2 (l-6
DBS 824-l O-400
stop DISA operation at a
to
for DISA using the DISA Auto
enabled
system
when the clock reaches 8 16 am )
Time Setting
CONF ON/OFF
This DISA End Time setting does not affect
2-17