Trunks; Trunk Connectors - Panasonic DBS 824 Manual

Trunks and Lines

Trunks

Trunk Connectors

Each DBS 824 backplane supports four loop start trunks using two RJ14
trunk connectors, labeled CN7 and CN9 (CN8 is used for Option Port Lines )
In addition, each installed 208 EXP (VB-42651) card supports two loop start
trunks using an RJ14 trunk connector, labeled CN2
Figure 4-l shows the maximum number of trunks that can be used with a
DBS 824
Figure 4-I DBS 824 trunk connections
OPL USE ONLY
A A
Issued 3/l /95 DBS 824-l O-300
MDF
4-3