Private Trunk Line - Panasonic DBS 824 Manual

FF2

Private Trunk Line

Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FF2 (Trunk)#
Description
Use this address to assign a private trunk line to an extension A number of
private trunks can belong to one extension but the same private mmk cannot
be assigned to multiple extensions
Once a private trunk is assigned to an extension, other extensions cannot
make outbound calls or receive inbound calls on that trunk (the system will
assign Toll Restriction Type 0 to the trunk on all other extensions) The
system will assign TRS Type 7 (no restrictions) to the private trunk assigned
to the extension
Programming
To assign a private trunk line(s) to an extension
To cancel private trunk assignment(s) for an extension
Related Programming
Day TRS Types O-7 for Trunks FF7 7# (ExtPort)# (Trunk)++ (0-7)#
Night TRS Types O-7 for Trunks FF7 8# (ExtPort)# (Trunk)# (0-7)#
Notes
Reprogramming Toll Restrictions
trunk setting is disabled, the system will
available to other extensions (TRS Type 0 will apply to that trunk on all
extensions ) Therefore, the trunk's TRS type must be manually
reprogrammed for each extension wishing to use that trunk (using addresses
FM 7# and FF7 8#)
Issued 3/l /95
(ExtPort)#
FF2 (l-6 or l-8)# 12# (l-16 or l-24)#
Trunk Number
CPC-S l-6
CPC-M l-8
FF2 (l-6 or l-8)# 12# (l-16 or l-24)# CONF ON/OFF
DBS 824-l O-400
Extension Port Number
CPC-S 1-16
CPC-M. l-24
for
Disabled Pride Trunks If a private
automatically make that trunk
Private Trunk Line
I
2-9