Panasonic DBS 824 Manual page 689

DSLT Features
Table 4-4 Call Waiting Text Messages
Message codes O-4 cannot be used
Operation
To Set Call Waiting
1
2
3
4
5
To answer Call Waiting (after disconnecting the current call)
1
2
1 Press HOLD
Issued 3/l /95
Message
Code
5
6
7
9
Lift the handset
Dial the extension number
Upon hearing busy tone, press "3 "
If you wish to send a text message, dial the desired message code (5-7 or
The message appears on the called party's phone if the called party has a
display phone (If the extension does not have a display, it will continue to
issue a call waiting tone )
Remain on the line until the called party picks up
Replace the handset.
The current call is disconnected
Rick up the handset
You are automatically connected to the extension sending the Call
Waiting
The current call is disconnected
l
DBS 824-l O-700
Message
"Visitor Here"
"Need Help"
"Important"
"Emergency"
Call Waiting
4-l 7