Panasonic DBS 824 Manual page 11

DBS Release Notes
CPC S/M Version 2 0
Notes
Varrable Mode
Version 8 0, CPC-S/M Version 2 0, or CPC-EX Verslon 1 0 only
Operatron
44 Series Phone Support
Page 10
Available on small-display phones only Thts new feature applies to the 44-serves
small-display phone only (i e , phones with a 2-line LCD display)
Incompatibility with older phone verszons
new 44-Series phones only
Hot Dkal Pad and Dzrectory Mode The Hot Dial Pad feature (FF3 ExtPort# 47#)
will not work on an extension rn Directory Mode
When the phone IS rn Variable Mode the features for Flexible Functron Screen
select keys 1 and 2 will display during each of the followmg call states
Call State
Dunng an mtercom call
l
Dunng a trunk call
l
After dialing a busy extension FF3 (ExtPort)# 33# (2539)#
l
* In these addresses, you assign a Flexible Function Screen (2539) to appear on
the extension while it
The select keys on the 44-series small-display phone are labeled ">" and "<" to the
left and right of the display's 2nd line
select key 2 (,'<" on the right) will perform the displayed feature
To use Variable Mode
1 Activate Vanable Mode by pressmg
When you dial *61 u-r the above sequence, the 1st line of the LCD
l
will display "Variable md ON
when you press the second
Use exrstmg addresses FFl 2# 7# 2# to assign screen text
l
The *61 code toggles Varrable Mode on and off Press
l
ON/OFF
2 While the extension IS engaged rn an mtercom call, the 2nd line will
display select key 1 and 2 features from the Flexible Function Screen
Directory Mode IS available on the
FF3 (ExtPort)# 28# (2539)#
FF3 (ExtPort)# 29# (2539)#
FF3 (ExtPort)# 30# (25-39)#
IS
Pressing select key 1 (,'>" on the left) or
ON/OFF *61 ON/OFF
The display will return to normal
April 2 1996
ON/OFF *61