Line Appearances - Panasonic DBS 824 Manual

Key Telephone Features
2
3
Considerations
l
l
l

Line Appearances

(CPC-S and CPC-M)
The DBS 824 provides up to four types of line appearances
The following table summarizes how each type of line appearance is used
Table 3-6
Direct Line (DL)
Appearances
Multi-CO (MCO)
Appearances
Multi-Line (ML)
Appearances
Issued 3/l /95
"CO TALK #XX" (where "XX" is the line number) appears on the
l
display
Press the REDIAL key
The last number dialed appears on the display
Complete the call and replace the handset.
The line key LED changes from green to red and then goes off
If the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the REDIAL key at the busy tone You can then redial the last
number dialed
The Last Number Redial feature can redial a number up to sixteen digits
long
A maximum of five Speed Dialing codes can be redialed
Definition
DL keys are used to originate and receive calls over specific trunk
numbers
ML keys are used to originate and receive CO line calls and intercom
calls
DBS 824-l O-700
Line Appearances
3-47