Panasonic DBS 824 Manual page 158

Auto Flash Redial
Auto Flash Redial
Software Version CPC-S and CPC-M, Version
Address FFl 2# l# 6# (0 or l)#
Description
By default, the REDIAL key sends a "flash" before redialing a number
When the DBS 824 is connected to a PBX sending a "flash" may place the
line to the PBX on hold, in this case, Auto Flash Redial should be disabled
Programming
Related Programming
PBX Flash Timer FFl 3# 16#
Trunk Port Type FF2 (Trunk)++ lO#
Notes
Timing The CO Line Flash and the Redial Flash features are controlled by
the same timer
Page l-10
1 0 and higher
O=REDIAL does not send "flash"
DBS 824-l O-400 Issued 3/l /95