Panasonic DBS 824 Manual page 218

Hide thumbs Also See for DBS 824:

Table of Contents

Automatic DISA Callers

Caller ID Automatic DISA

Automatic USA Callers

Software Version

Address FFl 2# #I (1.lO)# (PhoneNo )#

Use this program to assign up to 10 phone numbers for the Caller ID

Automatic DISA (Direct Inward System Access) feature When a caller (e g

company salesman) calls from one of the phone numbers assigned in this

address, the trunk receiving the call will automatically switch to DISA

without requiring the caller to enter an ID Code

The DISA feature gives the caller access to inside features normally available

only to another extension

Note: In order to use the Automatic DISA feature, the DBS 824 system must

have a CPC-M card and the Caller ID package installed

Related Programming

DISA Auto Answer FF2 (Trunk)!+ 11# (0 or l)#

Trunk Circuit Type FF2 (Trunk)+! 21# (0 or I)#

Matching The Caller's Phone Number

in the above programming address must exactly match the phone number

received by Caller ID (usually 10 digits)

Assigning DISA Tru&

do not assign any trunks as DISA trunks (see "DISA Auto Answer" address

CPC-M Only (Version 1 0 and above)

Phone Number Assignment

If the Caller ID Automatic DISA feature is used,

Caller's Phone Number

The caller's phone number entered

Chapters

Table of Contents