Canon MG7700 series Online Manual page 662

If you use this function in combination, select 2-sided for 2-sidedPrintSetting and select the
orientation and the stapling side of print paper on the Print settings screen.
For more on two-sided copy function:
Two-Sided Copying
When checking orientation:
When you are using the preview screen, the screen below is displayed before copying starts so that you
can check the orientation.
A. Tap to rotate the original by 180 degrees.
B. Tap to start scanning the original.
C. Tap to rescan the original.
When scanning is finished:
The screen below appears after scanning the first sheet of original.
A. Tap to start scanning the original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the
platen glass and tap Scan.
B. Tap to start copying the original already scanned.
The machine starts scanning the second sheet of original and copying.
Note
• You can add the copying job while printing.
Adding Copying Job (Reserve copy)
662