Forwarding Scanned Data To Computer Using Operation Panel - Canon MG7700 series Online Manual

Forwarding Scanned Data to Computer Using Operation Panel

Before forwarding scanned data to the computer, check the following:
• MP Drivers are installed. (Windows)
If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from the
Canon website.
• The scanner driver is installed. (Mac OS)
If the scanner driver is not yet installed, install the scanner driver from the Canon website.
• The machine is connected to a computer correctly.
Make sure the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable or LAN cable while the machine is in operation, or when the
computer is in the sleep or standby mode.
If you perform scanning via a network connection, make sure all the required settings have been
specified.
◦ For Windows:
Network Scan Settings
◦ For Mac OS:
Network Scan Settings
• The destination and the file name are specified in Canon IJ Scan Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For more on settings of
Canon IJ Scan Utility:
◦ For Windows:
Settings Dialog Box
◦ For Mac OS:
Settings Dialog
1. Make sure machine is turned on.
2. Flick HOME screen and tap
Using the Operation Panel
If you forward the data to the USB-connected computer:
The Scan standby screen is displayed.
Scan.
866