On the Scanner tab, you can specify the following settings.
• Available functions and settings vary depending on your scanner or printer.
Auto Power Settings
You can set to turn the machine on or off automatically.
Click Settings... to display the Auto Power Settings dialog box.
• If the machine is off or bi-directional communication is disabled, a message may appear because
the computer cannot collect the machine status. In that case, click OK to exit ScanGear (scanner
Auto Power On
Select Enable to turn on the machine automatically when data is received.
Auto Power Off
Specify the amount of time you want to set from the list. When this time lapses without any data
being received, the machine turns off automatically.
When connected to the network, depending on your model, the power does not turn off
automatically even if Auto Power Off is set.