Unpacking The Projector - Barco HDX-4K20 FLEX User Manual

2.2 Unpacking the projector

What has to be done ?
Upon delivery, the projector is packed in a carton box upon a wooden pallet and secured with banding and
fastening clips. Furthermore, to provide protection during transportation, the projector is surrounded with
foam. Once the projector has arrived at the installation site, it needs to be removed from the carton box and
wooden pallet in a safe manner without damaging the projector.
After unpacking let the projector acclimatize to a room temperature higher then 10°C (50°F) and
lower then 40°C (104°F). Neglecting this may result in a start up failure of the Light Processor Unit.
Required tools
cutter knife
How to unpack
1. Remove the banding around the carton box, by releasing the fastening clips as illustrated, and open the
box.
Image 2–1 Opening box
2. Remove the small box on top of the projector. This box contains the accessories such as manuals, remote
control, etc.
Image 2–2 Remove carton and foam rubber
Installation preparations
R5906070 /16 HDX 4K 23