Front Xlr Output Voltage Control - Barco UDX Series User Manual

GUI – System Settings

10.5 Front XLR output voltage control

What can be done?
The output voltage on the front XLR connector can be enabled or disabled. If enabled, the output voltage level
can be set to 0 V, 12 V or 24V.
The output voltage depends on the application or peripheral used. For example, the optional external
mechanical shutter requires 12 V. The motorized rigging frame on the other end requires 24 V.
DMX Art-Net can also enable the output voltage on the front XLR connector. To avoid that per accident a
voltage is activated via DMX Art-Net, set the power level to 0 V.
Location of the XLR connector
Image 10-22: Location of the XLR connector on the UDX
How to enable or disable?
1. In the main menu, select System Settings → Communication → DMX.
Image 10-23: Communication menu, DMX
The DMX menu is displayed.
Image 10-24: DMX menu
2. On the bottom of the DMX menu, Enable the XLR connector.
3. Select the desired Output Voltage.
168 R5906112 /09 UDX series
1