Contrast-Intensity - Barco HDX series Installation Manual

12. Alignment

12.10 Contrast-Intensity

Purpose
Contrast : change the contrast of the complete output signal (main and PiP window together) of the projected image.
Intensity : change the brightness of the complete output signal (main and PiP window together) of the projected image.
How to set up
1. Press Menu to activate the menus and select Alignment → Contrast/Intensity.
Image 12-54
Main menu, alignment
2. Press ENTER to select.
Image 12-56
Contrast enhancement
3. Use the ▲ or ▼ key to select Contrast Enhancement.
Use the ◄ or ► key to change the contrast enhancement until the desired value is reached (adjustable between 0 and 5)
4. Use the ▲ or ▼ key to select Intensity.
Use the ◄ or ► key to change the intensity until the desired value is reached (adjustable between 0 and 255)
Image 12-57
Intensity
206
Image 12-55
Alignment, contrast/intensity
R5905032 HDX SERIES 01/06/2011