Manipulating The Rigging Frame, Center Position; Orientation - Barco UDM-4K15-NL User Manual

GUI – Installation
6. Confirm with the OK button to return to the frame shift menu, or use the Menu back button to return to the
Lens menu.

8.7 Manipulating the rigging frame, center position

What can be done?
The motorized frame can be forced back to the center position by selecting Center motorized frame.
How to reset the motorized frame?
1. In the main menu, select Installation → Lens → Center motorized frame.
Image 8–16 Lens menu, Center motorized frame
A confirm action prompt will be displayed.
Image 8–17 Example of the Center motorized frame action prompt
2. Confirm to reset the frame to its center position.
Wait until the frame motors have stopped before doing other actions.

8.8 Orientation

What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
84 R5911443 /03 UDM