User controls – Source menu
7.1 Auto signal
About auto signal
When Auto Signal is enabled, the projector automatically detects and selects the input signal.
Once an input source is selected, press the "Input button" on the remote control or keypad to switch to other
available sources.
7.2 Input signal
About input signal
Select an input signal from the source list.
The available input sources are:
•
HDMI1
•
HDMI2
•
DVI-D
•
3G-SDI
•
HDBaseT
7.3 PIP/PBP
About PIP/PBP
PIP/PBP (picture in picture/picture by picture) allows the simultaneous displaying of two images from two
different input sources.
PIP/PBP
Select the desired mode:
•
Off:
Disable PIP/PBP mode.
•
PIP:
Display one input source on the main screen and the other input source in an inset window.
•
PBP:
Display two images of the same size on the screen.
Main source
Select an input source for the main image.
The available input sources are:
•
HDMI1
•
HDMI2
•
DVI-D
•
3G-SDI
•
HDBaseT
Sub source
Select an input source for the second image.
The available input sources are:
•
HDMI1
•
HDMI2
•
DVI-D
42
R5914653 /10
G62