Configuring Scan To Destination; Before You Begin; Configuring Default Scan Settings; Setting The Default Scan To View To Favorites - Xerox WorkCentre 4265 System Administrator Manual

Configuring Scan To Destination

The Scan To Destination feature allows you to associate scan destinations with address book contacts.
Users can select these contacts when scanning using the Scan To feature.

Before You Begin

• Add at least one contact to the Device Address Book.
• Add scan destinations to address book contacts.
For details, see Address Books

Configuring Default Scan Settings

In CentreWare Internet Services, click Properties > Services.
1.
2. Click Scan To.
3. For Defaults, click the Pencil icon.
4. Change the settings as needed. For details, see the Help in CentreWare Internet Services.

Setting the Default Scan To View to Favorites

In CentreWare Internet Services, click Properties > Services.
1.
2. Click Scan To.
3. To configure Address Book Policies, click the Pencil icon.
4. To configure the Device Address Book settings stored in the printer, click Edit.
To set the default Scan To view at the control panel as Favorites, under Policies, select View
5.
Favorites on Scan To Service Entry.
Click Save.
6.
on page 149.
® ®
Xerox WorkCentre 4265 Multifunction Printer
System Administrator Guide
Scanning
115