Other Printer Settings - Xerox document centre285 series User Manual

2.7
If necessary, use the printer control panel to define settings for the following items.
However, it is usually not necessary to change the factory settings of these items for normal use.
"5.3 Common Menu Items" for details on each item and the way of setting
When using TCP/IP (LPD)
Network/Port > LPD
Print Mode
PJL
Connect Time-Out
TBCP Filter
IP Filter
2
Allocate Memory > Buffer Size
LPD Spool
When using SMB
Network/Port > SMB
Print Mode
PJL
TBCP Filter
Allocate Memory > Buffer Size
SMB Spool
Set the following items by using CentreWare Internet Services or changing the "config.txt" file
of the printer via a Windows computer:
Workgroup
Host Name
[where xxxxxx is the last six digits of the Ethernet address of the printer]
Administrator Name
Administrator Password
Maximum Sessions
TBCP Filter
Auto Driver Download
Unicode Support
Auto Master Mode
Encrypt Password
"5.5 CentreWare Internet Services" for details on operating CentreWare Internet Services
Network Print Environment User Guide (Network.pdf) in the PCL Driver/Network Utility (Windows
CD-ROM for details on "config.txt" file
36

Other Printer Settings

(factory setting: Auto)
(factory setting: Enable)
(factory setting: 16 Secs)
(factory setting: Disable)
(factory setting: Off)
(factory setting: Off/256K)
(factory setting: Auto)
(factory setting: Enable)
(factory setting: Disable)
(factory setting: Off/256K)
(factory setting: WORKGROUP)
(factory setting: FX-xxxxxx)
(factory setting: admin)
(factory setting: admin)
(factory setting: 5)
(factory setting: Disable)
(factory setting: Enable)
(factory setting: Disable)
(factory setting: On)
(factory setting: On)

)