Tcp/Ip Configuration; Host (Computer) Configuration; Setting Up The Printer For Tcp/Ip Printing - Xerox Phaser 860 Networking Setup Manual

TCP/IP Configuration

The Configuration Page reports important information that you will need for TCP/IP
configuration. For information on printing a Configuration Page, see page 2.

Host (Computer) Configuration

Choose the procedure appropriate for your environment:
For installation on workstations when print jobs are to be sent through a print server,
I
see Installation on Workstations for Client-server Printing on page 9.
For installation on a workstation for peer-to-peer printing, see Installation on
I
Workstations for Peer-to-Peer Printing on page 9.

Setting Up the Printer for TCP/IP Printing

The Xerox Installer for Windows automatically performs the following functions to set up
your printer:
Locates your printer on the network.
I
Suggests an IP address for the printer if one has not already been assigned (for
I
example, from the front panel or by DHCP). You are given the opportunity to accept
the automatically assigned address or assign a different one. For information on other
methods of setting the printer's IP address, see page 13.
Windows 95/98/ME—Installs PhaserPort for Windows (if not already installed).
I
PhaserPort for Windows is a Xerox port monitor for printing over Windows 95/98/ME
TCP/IP peer-to-peer networks.
Windows NT—Installs Microsoft TCP/IP Printing Services (if not already installed).
I
Installs the driver.
I
Creates a printer in the Printers window.
I
Networking Setup Guide
TCP/IP Configuration
7