®
Invacare
- STORM
8.7
Lighting unit
Note
There are two different lighting units. A conventional lighting unit with bulbs and a LED lighting
unit.
8.7.1
Replacing the front bulb (conventional lighting unit)
Requirements:
· Phillips screwdriver size 2
·
Undo the concealed Phillips screw on the rear of the headlight/indicator combination.
·
Remove the transparent plastic cover.
·
Replace the defective bulb.
·
Close the cover and tighten the Phillips screw finger-tight.
8.7.2
Replacing the front LED (LED lighting unit)
·
It is not intended for an individual LED to be replaced. Replace the entire lighting unit as
described in chapter 8.7.3.
4 ®
Series
SERVICE MANUAL
77