Replacing Headlamp Brackets (Conventional Lighting System Starting 03/2012) - Invacare Storm4 Series Service Manual

®
Invacare - STORM
8.7.8 Replacing headlamp brackets (conventional lighting system starting
03/2012)
Requirements:
· Phillips screwdriver size 2
· Open-end wrench 8 mm
Uninstalling the tail light bracket:
·
Loosen both of the nuts (1) with an 8 mm open-end wrench and remove the headlight with the
bracket from the rubber mounting.
·
Loosen both Phillips head screws (2) to remove the headlight from the bracket.
·
Replace the bracket.
Installing the headlight bracket:
·
Assemble all parts again in reverse order.
·
Tighten the screws hand-tight.
·
Check all vehicle functions.
·
Perform an approximate adjustment of the headlight using the ratchet plate as a guide. The
final adjustment can be performed by the user according to the instructions found in the User
Guide.
4 ®
Series SERVICE MANUAL
87