Invacare Storm4 Series Service Manual page 188

SERVICE MANUAL
·
Remove the securing clip (4).
·
Remove the spacer (3).
·
Carefully remove the bolts (1) which connect the shock absorber (2) to the swing arm (5).
·
Loosen the three Allen screws (6) with a 6 mm Allen key and a 13 socket spanner.
·
Remove the bolts (3) together with the washers.
·
Pull the swing arm (5) out of the rear wheel link fork (7) and replace it.
·
Remove the trim as described in chapter 8.19.1 if necessary.
Refitting the swing arm:
·
Replace the defective parts.
·
Replace the parts in the reverse order.
·
To conclude, you should always carry out a trial run to test the vehicle functions.
188
®
Invacare - STORM
4 ®
Series